ESSER 500 BOOM PIPE

Lasts twice as long as ST 52

The Esser 500 boom pipe was developed for low-output concrete pumps and low-abrasive concrete. This cost-effective reinforced pipe features twin-layers and manganese cast elbows, providing twice the service life of a single-layer hardened pipe.

In addition, the Esser 500 boom pipe is fitted with Big Mouth flanges that can absorb more wear due to the increased thickness in the insert. This prevents the radical transfer of destructive wear from the elbow into the straight pipe.

Every Esser 500 boom pipe component meets or exceeds the specifications of all the concrete pump manufacturers for wall thickness, inner and outer diameter tolerances, weight restrictions, working pressure ratings and safety requirements.

For more information on this wear resistant pipe, contact us at (866) 734-0296.

Download Comparison Chart

4.8" (125mm) Twin Pipe

Location: Boom Pipe
Type: Twin Pipe 500
Diameter: DN 4.8" (125mm)
Wall Thickness: 4.50mm (2.50+2.00)
Hardness: up to 63 HRc
Inlet: Big Mouth Flange
Outlet: Big Mouth Flange
Maximum working pressure: 1233 psi (85 bar)
Weight (filled with concrete): 29.63 lbs/ft (44.10kg/m)
Weight (net): 99.45 lbs/9.84ft (45.11kg/3.0m)
Drawing: 1-0125-113-4000-00
Download Spec Sheet
Esser Pipe Technology
1733 90th Street, Sturtevant, WI 53177
Phone: (866) 734-0296 Fax: (866) 644-1527

Products | Accessories | Support | About Us | Contact Us | Home | Search | E-mail Signup